0086-510-85187837 24/7 Helpline
author： 2021-02-22
China's burners were created with the construction of several major oil fields after the founding of the People's Republic of China. At that time, burners were only used in industries that owned petroleum, and most of them were simple fuel burners. In the 1980s, after the reform and opening up, China's manufacturing industry was fully rejuvenated, and the development of the shipbuilding industry in particular led to the birth and development of the domestic burner industry. The rise of the shipbuilding industry has increased the demand for marine burners in China year by year. However, the lack of domestic production and suppliers, almost all rely on imports, high-priced imports consume a lot of foreign exchange and can not provide timely and sufficient supplies.
When the power is switched on, the combustion machine is started, and an electric spark is generated between the ignition electrodes. After about 13 seconds of pre-blowing, the solenoid valve of the oil pump is automatically opened.At this point, the flame detector senses the flame brightness and the controller is locked.The ignition electrode will delay ignition for about 15 seconds to stop ignition, and the burner will enter the normal working state.If the ignition is not successful, no flame is formed, or the flame detector does not feel the brightness of the flame, then after about 10 seconds of safety time, the safety alarm system will operate, the starting working procedure of the burner will be cut off, and the fault red light will be on.When the combustion machine is just started, if the flame detector has sensed the brightness, the safety system will operate, the controller will not enter the normal program, the solenoid valve will not open, the nozzle will not spray oil, after about 10 minutes of safety time, the fault red light will be on.Therefore, when starting the burner in the light must first cover the flame detector, do not let it see the light, until the burner after the flame, immediately release the flame detector, otherwise the burner can not work properly.The burner is red for 3 minutes before restarting.
electric gas boiler burnerSince its establishment, EBICO has been paying attention to the maintenance and improvement of service quality. Whether it is pre-sale customization consulting, on-site installation and debugging, or after-sales repair and maintenance, all the staff of EBICO technology department always require themselves with the most strict standards to bring the best quality service and experience to customers.
Burner for ep-w waste incinerator
Applicable fuel: natural gas / light / heavy / residual oil / mixed fuel
Power range: 500-20000kw
Suitable waste incinerator: 200-900 tons / day
Technical features: stainless steel body with outstanding high temperature and corrosion resistance
When the power is switched on, the combustion machine is started, and an electric spark is generated between the ignition electrodes. After about 13 seconds of pre-blowing, the solenoid valve of the oil pump is automatically opened.At this point, the flame detector senses the flame brightness and the controller is locked.The ignition electrode will delay ignition for about 15 seconds to stop ignition, and the burner will enter the normal working state.If the ignition is not successful, no flame is formed, or the flame detector does not feel the brightness of the flame, then after about 10 seconds of safety time, the safety alarm system will operate, the starting working procedure of the burner will be cut off, and the fault red light will be on.When the combustion machine is just started, if the flame detector has sensed the brightness, the safety system will operate, the controller will not enter the normal program, the solenoid valve will not open, the nozzle will not spray oil, after about 10 minutes of safety time, the fault red light will be on.Therefore, when starting the burner in the light must first cover the flame detector, do not let it see the light, until the burner after the flame, immediately release the flame detector, otherwise the burner can not work properly.The burner is red for 3 minutes before restarting.
In the broad sense of burner concept, domestic water heater, gas stove and even lighter can be considered as a kind of burner. According to its working principle, the burner can be defined as a kind of equipment which can transform the substance into heat energy through the chemical reaction of combustion, that is, air and fuel are mixed in a proper proportion through the device to make it fully burn. Burners have many kinds of classification methods according to their different properties.
electric gas boiler burnerIn order to realize the high level of international after-sales service of ebico, in the early stage of the project, the after-sales service of the later stage of the project must be included in the project, which is considered and analyzed as an indispensable part of the whole project, so as to better realize the forward movement of the after-sales service sector of the project.