0086-510-85187837 24/7 Helpline
author： 2020-05-15
Because gas boiler burners, the main fuel of the combustion machine is divided into natural gas liquefied petroleum gas, city gas grade other combustible gas, these kinds of fuels belong to flammable, explosive dangerous gas, in the use and storage process should be highly concerned about the safety, otherwise there will be a major safety accident.In order to ensure safe debugging operation, the operation standard of gas burner is formulated as follows:
1. The inspection before the commissioning of the burner and burner of the gas boiler has three aspects: check whether the gas is in place, whether the gas pipeline is clean and unobstructed, and whether the valve has been opened;Whether there is any pipeline exposure phenomenon, whether the pipeline installation is reasonable;Discharge air from the pipeline in front of the gas valve to ensure that there is no mixed air in the pipeline, and the exhaust pipe should be connected to the outside.
2. Internal inspection of burners and burners for gas-fired boilers: whether the burners are properly installed and adjusted;Whether the motor rotates in the correct direction;Whether the external circuit connection meets the requirements;According to the circuit condition, the cold state simulation of the burner is carried out to observe whether all parts of the equipment are normal in operation and whether the flame protection part is normal.
Iii. Commissioning of burners and burners for gas-fired boilers:
Check whether the external gas is in place, the pipeline is unobstructed, and the external power supply is in place;Adjust the burner's load to a small load and the ignition position to a small load accordingly. Close the large load for ignition and observe the flame condition. Adjust the servomotor or damper according to the flame condition.
The above is a part of the safe operation rules for gas boiler burners and burners, and the other part will be Shared with friends. Friends are welcome to pay attention to reading.Yueyang yuanda thermal energy equipment co., LTD is a high and new technology enterprise engaged in the research and development and manufacture of thermal and environmental protection equipment technology, and is committed to the research and development and application of fuel combustion, energy conservation and environmental protection technology in industrial furnace equipment.Friends have questions or need to contact us, to provide free technical advice yo!